Common configuration of woodworking engraving machine

The choice of spindle and inverter, the common 3-axis woodworking engraving machine spindle is divided into two types: water cooling and air cooling. The water-cooled spindle is used with Fuling inverter, with low noise, economical and good customer feedback. Air-cooled spindles are typically cooled by air for easy operation. Generally, the water-cooled spindle speed is 24000RPM, and the air-cooled spindle is 18000RPM. The 24000RPM air-cooled spindle has a higher cost.
    The common transmission system of woodworking engraving machine is XY axis helical rack + square rail transmission. The square rail generally adopts Taiwan's Shangyin HIWIN, and the 1325 model is mostly 20# square rail; the rack ensures the speed of the equipment, the linearity of the square rail is good, and the machining accuracy is guaranteed; the position of the transmission system in the whole machine tool is particularly important, which is determined to some extent. The performance of the machine tool.
    In terms of gantry and bed structure, the new type of square tube is equipped with a lifting ring to facilitate the transportation of the machine. The square tube is thick and strong, and adopts seamless welding technology. It is durable and non-deformable, and the operation is more stable. The gantry is generally made of 18mm thick steel and is sturdy.
    The woodworking engraving machine is recommended to add a vacuum cleaner. Because the wood material is processed, the dust is particularly serious. If it is too dirty, it will not be beneficial to the service life of the machine or the personnel. The vacuum bag can be selected from single or double bags.
    The selection of the countertops is mainly made up of ordinary aluminum profiles T-slot countertops and vacuum adsorption countertops. The latter is suitable for mass production of large-scale wood processing, which is more efficient than ordinary countertops.
    The rated voltage is 380V/50HZ under normal working voltage, and can be changed to 220V/50HZ in special cases. Lubrication systems are divided into fully automatic lubrication systems (software control) and semi-automatic lubrication systems (manual control).
    The software is divided into control software and programming software, and the control software is like DSP/NK105/Weihong/Taiwan New Generation/Siemens. Programming software: domestic Wentai, fine carving, etc.; foreign: French TYPE3, UK: Artcam and so on. The drive system is divided into a stepping system and a servo system. The stepping system is open-loop control with low torque and poor precision. The servo system adopts closed-loop control with high torque and high precision.
    The control methods mainly include handle control or computer case control. The handle control generally only displays the motion coordinates, and the technician needs to input the design layout into the board through the USB interface, and then the board is connected with the handle, and the handle is controlled. Handle control makes working at ease easier. The handle control generally selects DSP or NK105. The computer chassis control can fully display the simulation processing trajectory and motion coordinates.