As far as the carving machine is concerned, its main axis is very important. A good spindle allows us to carry out the engraving process better. The unsatisfactory main axis allows us to spend a lot of time in the engraving process. However, the main axis of the carving machine is somewhat different. So, what is the difference between the main shaft of the carving machine? Below, let the Zhengzhou carving machine manufacturer introduce it to you.
1, water-cooled spindle motor Wang Wensheng is the use of water circulation to cool the heat generated by the spindle after high-speed rotation, this method will work well, because the temperature after passing through the flow will not exceed 40 degrees. The air-cooled spindle motor uses a fan method to dissipate heat, and its application is not as cool as water.
2. In terms of noise, the water-cooled spindle motor has basically no noise, but the air-cooled spindle motor is very loud. However, in terms of service life, since the water-cooled spindle motor should pay attention to maintenance and change the water, it may use an industrial water cooler, so its service life is much longer than that of the air-cooled spindle motor.
3. In terms of precision accuracy, the axial and radial runout of the water-cooled spindle motor are basically below 0.003 mm, which is far from the air-cooled spindle motor, which is also different.
Through the introduction of the Zhengzhou carving machine manufacturer, I believe that you now know what is the difference between the spindle of the carving machine.
