1. About the type and use of the carving machine
The customer must understand the size of the required processing data, so that the type of engraving machine that needs to be purchased can be determined; the type of processing data can be used to select the type of engraving machine; the thickness of the processing data is that the deep carving is still only processing the surface. To select the size of the spindle power of the carving machine; the processing type, for example, whether you are carving or still punching or cutting, to select the equipment to sculpt the tool.
Carving machine
2, about the price of the carving machine
Merchants say "shopping three", please do not use low-cost carving machine to lower the price of our factory carving machine; as the saying goes, "a penny is a piece of goods", our factory guarantees defective parts, quality products, quality after-sales service The majority of new and old customers.
3, on the electric voltage problem of the carving machine
Determine the position voltage of the equipment and the scale of the applicable current. The high-power main shaft needs three-phase AC power. The small-power main shaft can be used for two-phase electric AC power. It should be marked to the engraving machine manufacturer in advance according to the customer's local power consumption, so as to avoid unnecessary loss.
Carving machine
4, on the computer problems of the carving machine
For the computer-operated Weihong system, the device CPU must be 32-bit CPU processor, and the computer software is preferably Windows 2000 or XP. If the operating system of the carving machine is the DSP controller operating system, there is no detailed requirement for the computer equipment.
5, about the size and packaging of the carving machine
The root type of the carving machine is determined according to the mission schedule, so the outer dimensions of the machine are larger than the type. According to the detailed type of carving machine, the customer can consult the manufacturer to transfer the machine to the household.
In addition to the export or the customer's designated wooden box packaging, the root of the carving machine is packaged with protective film and gown.
Metal carving machine
6, on the issue of delivery and logistics
After the engraving machine is packaged, the factory contacts the contracted logistics to pull the goods. When the customer inspects the goods, the package is damaged or the machine may be damaged. Perhaps the accessories are missing. You can contact the manufacturer at the first time. The manufacturer has all the problems and has nothing to do with the customer.
If the customer specifies the logistics delivery, then the customer will bear all the problems when the customer inspects the goods.
