The appearance of woodworking engraving machine has greatly improved the efficiency. Many customers have paid attention to the usual maintenance work after purchasing the woodworking engraving machine. When the mechanical technicians train on the spot, they will teach the customer the precautions and maintenance. Method, here is a simple explanation of the usual maintenance work of the woodworking engraving machine.
First of all: the brain part of the woodworking engraving machine belongs to the electronic equipment. The dust in the factory will accumulate in the mainframe of the computer. Especially in the summer, if the computer does not dissipate heat well, it will easily burn the circuit board, in order to keep the computer running smoothly. Also need to regularly disinfect and defragment the disk.
Secondly, it is necessary to clean the lead screw, industrial control box and circuit board regularly, and clean the work surface in time, including the material debris next to the guide rail and the guide rail to prevent the machine from appearing during the working process due to debris interference.
Again: slowly move back and forth after adding oil to ensure that the lubricant can be evenly applied to the guide rail and the lead screw. If the machine is not used for a long time, it should be refueled regularly to ensure the flexibility of the transmission system. First clean the rails and lead screws, and use a cloth (without hair removal) to clean off the oil and material scraps on the rails and lead screws. Due to the low temperature, both the guide rail and the lead screw can be added with oil. It is best to add antifreeze oil. The refueling cycle is twice a month, that is, every two weeks. Add cooling water or coolant to the CNC economic woodworking engraving machine, and keep the cooling water free of impurities.
Finally: When using woodworking engraving machines in winter, be sure to pour out the water in the tank when not using the machine to prevent the water tank and water pipes from freezing. The temperature of the operation workshop is preferably higher and higher, and the winter is likely to cause ice formation in the woodworking machine water tank. The temperature has little effect on the woodworking engraving machine, but because the user adds butter to the screw, the winter also forgets to clean up, which leads to the opening of each boot. Some studios have very low temperatures. Although the oil is added, it can still be frozen. On, the machine can't run.
