The operation of the control system of the coffin carving machine and the carpenter engraving machine mainly refers to the operation of controlling the motor speed of the spindle of the engraving machine, the change of the feed speed, the movement step and the operation of the carpenter carving machine and the starting processing on the computer. These tasks are carried out at the interface of EN3D “Carving and Machining”. In order to ensure that the carpenter carving machine is safe and convenient in operation, the operator can set three sets of parameters, together with the normal change of the tool change and the tool setting. The three sets of azimuth parameters are the machine stroke parameters, the tool change position and the tool position, and the three orientation parameters of the “azimuth parameter setting” are as follows:
1. Tool change position
This group of parameters is used to set the XYZ axis coordinates of the “tool change position” for convenient tool change. After setting the “tool change position”, after using “to change the tool position” in “special motion”, the machine head will move to the set position and wait for the operator to perform the tool change operation. The detailed setting orientation is: the skill control machine moves to the orientation of the convenient tool change operation, records the current machine coordinate value, and inputs it into the corresponding “azimuth parameter”.
2, coffin carving machine (carpent carver machine) stroke parameters
This group of parameters is used to set the minimum and maximum coordinates of the machine XYZ three axes. After setting the minimum and maximum coordinates of the three axes, the phenomenon of overtravel will not be exhibited when the machine controls the movement of the machine tool. However, this set of values is invalid in the programmed machining state. If the workpiece coordinate origin is set incorrectly, the “overtravel” may still be presented. "The fault, the detailed setting method is:
According to the stroke scale of different types of carpenter carving machine, the manual movement machine tool is selected to move the machine tool to the limit position of the three axes until it hits the stroke switch, and the XYZ three axes can be moved to the minimum and maximum coordinate values. The corresponding orientation in the parameter can be.
